Description
SIGMAZINC 109HS SIGMA MARINE AND PROTECTIVE COATINGS
Hellog Energy and Equipment is a supplier and distributor of Sigma Marine coatings in Nigeria, our SIGMAZINC 109HS SIGMA MARINE AND PROTECTIVE COATINGS is a two-component, high solids polyamide adduct cured zinc rich epoxy primer, the colors is reddish gray gloss level is Flat
PRINCIPAL CHARACTERISTICS SIGMAZINC 109HS SIGMA MARINE AND PROTECTIVE COATINGS
Below are the unique characteristics of this product.
- Designed as a system primer for various paint systems
- Excellent anticorrosive properties
- Quick-drying, can be overcoated after a short interval
- Can serve as a holding primer for various maintenance systems for a total repair
- Very good primer for systems with high solids epoxy build coats
- Complies with SSPC-Paint 20 level 2 and ISO 12944.5
RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES
Immersion exposure
- Steel; blast cleaned to ISO-Sa21⁄2, blasting profile 40 – 70 μm (1.6 – 2.8 mils)
- Steel with approved zinc silicate shop primer; pretreated according to SPSS-Ss Atmospheric exposure conditions
- Steel; blast cleaned to ISO-Sa21⁄2, blasting profile 40 – 70 μm (1.6 – 2.8 mils)
- Steel with approved zinc silicate shop primer pretreated according to SPSS or power tool cleaned to SPSS-Pt3 Substrate temperature
- Substrate temperature during application and curing down to 0°C (32°F) is acceptable; provided the substrate is free from ice and dry
- Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
INSTRUCTIONS FOR USE
Mixing ratio by volume: base to hardener 80:20 (4:1)
- The temperature of the mixed base and hardener should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
- Adding too much thinner results in reduced sag resistance and slower cure
- Thinner should be added after mixing the components
- Induction time; None
- Pot life; 6 hours at 20°C (68°F)
Contact Our Coatings Team for a free quote
Reviews
There are no reviews yet.