Description
Sigmatherm 175 Sigma marine and protective coatings
Hellog Energy and Equipment is a supplier and distributor of Sigma Marine coatings in Nigeria, Our Sigmatherm 175 Sigma marine and protective coatings is a single coat heat-resistant modified alkyd aluminum finish, appropriate for applications in Marine dry dock, chemical and petrochemical plants, offshore applications, Marine new builds and sea stores
Product characteristics of Sigmatherm 175 Sigma marine and protective coatings
- Heat-resistant up to 175°C (350°F)
- High-brilliancy
- Spray application improves the appearance
- A minimum drying time of 3 days at 20°C (68°F) should be allowed before exposure to heat
RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES
Substrate conditions
- Previous coat must be dry and free from any contamination
- Substrate temperature and application conditions
-  Substrate temperature during application should be at least 3°C (5°F) above dew point
SYSTEM SPECIFICATION
• HEAT RESISTANT SYSTEMS – SYSTEM SHEET 3140
INSTRUCTIONS FOR USE
- Stir well before use
- The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain
- application viscosity
- Adding too much thinner results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434) air spray.
Recommended thinner
THINNER 20-05; Volume of thinner; 0 – 3%, depending on required thickness and application conditions
Nozzle orifice; 1.8 – 2.0 mm (approx. 0.070 – 0.079 in)
Nozzle pressure; 0.3 – 0.4 MPa (approx. 3 – 4 bar; 44 – 58 p.s.i.)
Contact Our Coatings Team for a free quote
Reviews
There are no reviews yet.