Description
SIGMA VIKOTE 56 SIGMA PROTECTIVE AND MARINE COATINGS
Hellog Energy and Equipment is a distributor and supplier of Sigma Marine coatings in Nigeria, our SIGMA VIKOTE 56 SIGMA PROTECTIVE AND MARINE COATINGS is a single component modified acrylic finish coating, it is used as a finish coat, have colors of white and various other colors and gloss finish, this product is used for marine dry dock, inland marine and sea stores
PRODUCT CHARACTERISTICS
- Finish coat for above-water areas
- Good gloss and color retention
- Resistant to water and splash of mild chemicals
- Fast-drying
- Can be applied at low temperatures, down to –10°C (14°F)
RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES
Substrate conditions
- • Previous coat (chlorinated rubber, vinyl or acrylic coatings) must be dry and free from any contamination
- Substrate temperature and application conditions
- • Substrate temperature during application should be at least 3°C (5°F) above dew point
SPECIFICATIONS
- SYSTEMS FOR BOOTTOP AND TOPSIDE – SYSTEM SHEET 3102
- SYSTEMS FOR DECKS – SYSTEM SHEET 3103
- SYSTEMS FOR SUPERSTRUCTURE AND DECK FITTINGS – SYSTEM SHEET 3104
DIRECTION FOR USE
- Stir well before use
- The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtainapplication viscosity
- Adding too much thinner results in reduced sag resistance
- Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and1434)Air spray
Recommended thinner
THINNER 21-06
Volume of thinner
5 – 10%, depending on required thickness and application conditions
Product Technical Datasheet Download
Contact our coating team for product quote.
Reviews
There are no reviews yet.